Home » Dmse » andersoni@ameslab.gov

Iver E. Anderson

Adjunct Professor
Address
222 Metals Development
The Ames Laboratory
Ames, IA 50011-3020
Phone 515-294-9791
Fax 515-294-8727
Email andersoni@ameslab.gov

Research Interests

  • Powder metallurgy
  • Rapid solidification
  • High-pressure gas atomization
  • Centrifugal atomization
  • Powder processing of magnetics
  • Electronic and Stuctural Materials
  • Joining Materials Design

        Project Affiliations:

(Chronologically most recent on top)Education

  • Ph.D. Metallurgical Engineering, University of Wisconsin-Madison, 1982
  • M.S. Metallurgical Engineering, University of Wisconsin-Madison, 1977
  • B.S. Metallurgical Engineering, Michigan Technological University, 1975

(Chronologically most recent on top)Professional Appointments

  • 1994 - present Adjunct Professor, Materials Science and Engineering Department, Iowa State University
  • 1987 - present Principal Investigator, Institute for Physical Research and Technology, Iowa State University
  • 1991 - present Senior Metallurgist, Metal & Ceramic Sciences Program, Ames Laboratory, Institute for Physical Research and Technology, Iowa State University
  • 1997 - 2001 Program Director, Metallurgy and Ceramics Program, Ames Laboratory, Institute for Physical Research and Technology, Iowa State University
  • 1991 - 1994 Adjunct Associate Professor, Materials Science and Engineering Department, Iowa State University
  • 1989 - 1991 Adjunct Assistant Professor, Materials Science and Engineering Department, Iowa State University
  • 1987 - 1991 Metallurgist, Metallurgy & Ceramics Program, Ames Laboratory, Institute for Physical Research and Technology, Iowa State University
  • 1982 - 1987 Staff Metallurgist, Materials Science and Technology Division, U.S. Naval Research Laboratory

(Chronologically most recent on top)Honors & Awards

  • 2008 Distinguished Scientist/Engineer from EMPM Division of TMS
  • 2008 Excellence in Research Award from MSE Department, Iowa State University
  • 2006 Fellow of American Powder Metallurgy Institute
  • 2006 Iowa Inventor of the Year Award
  • 2001 Energy 100 Award
  • 1996 TMS Distinguished Service Award
  • 1994 Fellow of ASM International
  • 1991 R&D-100 Award
  • 1991 Federal Laboratory Consortium, Award for Excellence in Technology Transfer

(Chronologically most recent on top)Publications with the Ames Laboratory

2012
Tang W; Xing Q F; Dennis K W; Oster N T; Kramer M J; Anderson I E; McCallum R W . 2012. Anisotropic Hot-Deformed MRE-Fe-B Magnets With Zn Powder Addition (MRE = Nd plus Y plus Dy). IEEE Transactions on Magnetics. 48:3147-3149. abstract
Export: Tagged BibTex

Rieken J R; Anderson I E; Kramer M J; Odette G R; Stergar E; Haney E . 2012. Reactive gas atomization processing for Fe-based ODS alloys. Journal of Nuclear Materials. 428:65-75. abstract
Export: Tagged BibTex

Boesenberg A J; Anderson I E; Harringa J L . 2012. Development of Sn-Ag-Cu-X Solders for Electronic Assembly by Micro-Alloying with Al. Journal of Electronic Materials. 41:1868-1881. abstract
Export: Tagged BibTex

Kramer M J; McCallum R W; Anderson I A; Constantinides S . 2012. Prospects for Non-Rare Earth Permanent Magnets for Traction Motors and Generators. JOM. 64:752-763. abstract
Export: Tagged BibTex

Oster N T; Cavanaugh D T; Dennis K W; Kramer M J; McCallum R W; Anderson I E . 2012. Effects of Ag additions on melt-spun RE2Fe14B microstructure and texture. Journal of Applied Physics. 111:07a723. abstract
Export: Tagged BibTex

Tang W; Dennis K W; Kramer M J; Anderson I E; McCallum R W . 2012. Studies of sintered MRE-Fe-B magnets by DyF3 addition or diffusion treatment (MRE = Nd+Y+Dy). Journal of Applied Physics. 111:07a736. abstract
Export: Tagged BibTex

Anderson I E; Boesenberg A; Harringa J; Riegner D; Steinmetz A; Hillman D . 2012. Comparison of Extensive Thermal Cycling Effects on Microstructure Development in Micro-alloyed Sn-Ag-Cu Solder Joints. Journal of Electronic Materials. 41:390-397. abstract
Export: Tagged BibTex

2011
Reiken J R; Anderson I E; Kramer M J . 2011. Innovative Powder Processing of Oxide Dispersion Strengthened (ODS) Ferritic Stainless Steels. Advances in Powder Metallurgy & Particulate Material — 2011. 1:31. abstract
Export: Tagged BibTex

Wu Y Q; Tang W; Dennis K W; Oster N; McCallum R W; Anderson I E; Kramer M J . 2011. Effective grain pinning revealed by nanoscale electron tomography. Journal of Applied Physics. 109:07a705. abstract
Export: Tagged BibTex

Tang W; Wu Y Q; Dennis K W; Oster N T; Kramer M J; Anderson I E; McCallum R W . 2011. Studies of microstructure and magnetic properties in sintered mixed rare earth (MRE) -Fe-B magnets (MRE = Nd plus La plus Dy). Journal of Applied Physics. 109:07a704. abstract
Export: Tagged BibTex