Profilometer

Hommel T-8000 surface profilometer (right) and Falex ISC 450 pin-on-disk tribometer (left).

Profilometer

• T-8000 diamond tip contact surface profilometer
• Can measure 2-D or integrated 3-D surface traces
• Practical measurement of features from 0.2 um to 1.2mm
• Measurement area up to 5cm x 5cm with a minimum parallel trace distance of 2.5 um
• Computer control and data acquisition Software for interpreting 2-D and 3-D measurements

Tribometer

• Falex ISC 450 pin-on-disk tribometer
• Normal loads from .01 N to 10N
• Rotational speed from 30-300 rpm
• Wear scar diameter 5mm-50mm
• Pin holders for most ball materials 1.5mm - 6.35mm
• Controlled humidity testing
• Temperature control from 25ºC to 600ºC
• Computer control and data acquisition